Main Page
From NebarnixWiki
Revision as of 07:30, 7 July 2015 by NebarnixWikiSysop (talk | contribs)
Welcome!
The purpose of this wiki is to release the documentation of my projects which might otherwise stay cooped up in my logbooks and stay hidden or get erased from whiteboards. It is my effort to release my free time research to the world that others might benefit or use it in some way.
Hopefully you will find something useful out of this online and open engineering notebook!
Drone Projects
- A simple 808 camera bracket for the COTS V222/V959 quad
- A Dethklok/Klingon/H.R. Giger inspired quadcopter frame
Electronics Projects
- A mid sized 720W spark gap tesla coil
- Electroluminescent Wire Driver
- MSP430 based square wave generator
- Razor E300 Wireless SOC system
- TL494 based flyback transformer driver
- Simple SEM Lens Driver Designs
- Raspberry pi based data logger and visualization webserver
- Raspberry pi driven irrigation controller
Photography Projects
- Microsecond Flash Unit
- Timelapser Camera Controller
- Chronometer trigger for the high speed flash
- Automatic Camera/Flash/Event Trigger
- KAP Controller V2
- 3D printed LED Ringflash
- 3D Printed Strobe Ringlight
- 3D Printed Tripod Fix
Radio Projects
- CC1101 Bidirectional PA Module with 4W PA and 11dB LNA
- A CC1101<=>CC2500 repeater/bridge
- DIY Yaris Remote Start System
- A 3D Printed Key FOB to interface with above Remote Access System
- A Wireless GPS Node
- Digital RF Camera Remotes
- 70cm quagi antenna optimization
Microscope Projects
- LED microscope mod on a Chinese biological scope
- LED microscope mod on a Reichert wafer inspection scope
- Substage Flash Unit
- Motor driver for fine focus Z-stacking
- Microscope out of disposable camera optics
- A new substage condenser mount using a steel band to clamp
Astronomy Projects
- Manual Barn Door Tracker
- Candia the 10" Telescope
Machining Projects
Software Projects
- A php based image => reprap style gcode converter for laser engraving images
- An OpenSCAD script to generate 3D printable press fitted vacuum flange dust caps
- An OpenSCAD script to generate microscope darkfield and oblique field stops
- A GPS Reciever to Google Earth Plotter
My Photography
<EMBED src="http://www.flickr.com/apps/slideshow/show.swf?v=71649" width=800 height=400 type=application/x-shockwave-flash flashvars="offsite=true&lang=en-us&page_show_url=%2Fphotos%2Fnebarnix%2Fshow%2F&page_show_back_url=%2Fphotos%2Fnebarnix%2F&user_id=70259473@N00&jump_to=" allowfullscreen="true"></EMBED>