Difference between revisions of "FlangeCovers"

From NebarnixWiki
Jump to navigationJump to search
(New Page)
 
Line 3: Line 3:
  
 
==OpenSCAD==
 
==OpenSCAD==
I wrote an [http://www.openscad.org/ OpenSCAD] script that prints exactly 5 layers and 2 perimeters on [http://www.heatsynclabs.org/ Heatsync's] ultimaker 3D printer.  
+
I wrote an [http://www.openscad.org/ OpenSCAD] script that prints exactly 5 layers and 2 perimeters on [http://www.heatsynclabs.org/ Heatsync's] ultimaker 3D printer. All dimensions are in mm.
  
 
<pre>
 
<pre>

Revision as of 16:09, 29 March 2013

Problem Statement

I want to get away from crumpling aluminum foil over unmated KF flanges. It looks nasty and sometimes it falls off anyway. I want to 3D print dust caps but I only want to have to plug in a single caliper reading of the diamater of the flange.

OpenSCAD

I wrote an OpenSCAD script that prints exactly 5 layers and 2 perimeters on Heatsync's ultimaker 3D printer. All dimensions are in mm.

height = 5;
thickness = 0.6;
wallThick = 1.17;
flangeOD=29.81;
Fit = 0.25;
insideDiameter = flangeOD + Fit;

rotate(a=[0,180,0])
difference()
{
cylinder(h=height, r=((insideDiameter/2)+wallThick), $fn=100);
cylinder(h=(height-thickness), r=insideDiameter/2, $fn=100);
}


Ultimaker PLA Results

Works like a charm!