Uploads by NebarnixWikiSysop
From NebarnixWiki
Jump to navigationJump to searchThis special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 12:07, 31 March 2014 | RingflashHotshoePCBholderAssembled.jpg (file) |  |
118 KB | Printed PCB hotshoe holder with PCB attached. | 1 |
| 07:09, 25 March 2014 | RingflashHotshoeMount.png (file) |  |
115 KB | 1 | |
| 07:09, 25 March 2014 | RingflashLEDWiring.jpg (file) |  |
83 KB | 1 | |
| 07:08, 25 March 2014 | RingflashTesting.jpg (file) |  |
201 KB | 1 | |
| 07:08, 25 March 2014 | RingflashBoardonCam.jpg (file) |  |
70 KB | Not the actual mounting method, just to show size | 1 |
| 07:06, 25 March 2014 | RingflashPCBPopulated.jpg (file) |  |
109 KB | 1 | |
| 08:23, 28 February 2014 | MicroscopeCondenserMountCustom.png (file) |  |
86 KB | Solidworks drawing of the customized condenser mount. | 1 |
| 08:22, 28 February 2014 | MicroscopeCondenserMountStock.png (file) |  |
92 KB | Solidworks drawing of the stock condenser mount | 1 |
| 10:00, 27 February 2014 | InstalledCondenserMountCloseup.jpg (file) |  |
108 KB | A closeup view of the finished part installed and holding a phase contrast turret condenser. | 1 |
| 09:59, 27 February 2014 | InstalledCondenserMount.jpg (file) |  |
85 KB | The finished part installed and holding a phase contrast turret condenser. | 1 |
| 09:58, 27 February 2014 | CondenserMountFirstBabyStepLathe.jpg (file) |  |
114 KB | A baby picture of the condenser mount after its first facing and turning operations. Awwwe they just grow up so fast :') | 1 |
| 09:55, 27 February 2014 | CondenserMountAnodized.jpg (file) |  |
92 KB | Substage condenser mount after anodization and stainless steel clamp installation | 1 |
| 09:53, 27 February 2014 | AssembledSubstageCarriage.jpg (file) |  |
110 KB | The new substage condenser holder assembled into the carriage | 1 |
| 09:20, 27 February 2014 | StockCondenserHolderDrawing.jpg (file) |  |
102 KB | A drawing of the stock substage condenser holder on a Chinese scope | 1 |
| 12:20, 26 February 2014 | IsabelleHighChair.jpg (file) |  |
275 KB | Isabelle uses the fixed high chair to eat Thanksgiving dinner! | 1 |
| 11:48, 26 February 2014 | Linear Dimmer CAT4101.png (file) |  |
19 KB | Brightness control is achieved by dividing a 0-5V signal generated by the brightness trimpot then using the resulting voltage to set a current through a sense resistor. The sense resistor is 300Ω, meaning that the voltage across it for 2.5mA is 750mV. Th | 1 |
| 17:42, 3 February 2014 | Three-Lens-Microscope-Prototype.jpg (file) |  |
91 KB | A lens-rail prototype of the three lens educational microscope made from plastic lenses | 1 |
| 12:57, 30 October 2013 | PrintedTripodHeadTeardropHoles part1.jpg (file) |  |
189 KB | Snapshot of the finished base piece of the printed tripod head. The piece should be printed as TWO pieces and bonded. | 1 |
| 12:55, 30 October 2013 | PrintedTripodHeadSketch part2.png (file) |  |
98 KB | Reference Sketches of the top/platform part of the printed tripod. | 1 |
| 12:54, 30 October 2013 | PrintedTripodHeadSketch part1.png (file) |  |
141 KB | Reference Sketches of the base part of the printed tripod. | 1 |
| 11:49, 10 October 2013 | RingflashV1.1 oncam.JPG (file) |  |
76 KB | 1 | |
| 11:49, 10 October 2013 | RingflashV1.1 top grid.JPG (file) |  |
143 KB | 1 | |
| 11:49, 10 October 2013 | RingflashV1.1 top.JPG (file) |  |
144 KB | 1 | |
| 11:48, 10 October 2013 | RingflashV1.1 bot.JPG (file) |  |
179 KB | 1 | |
| 11:48, 10 October 2013 | RingflashV1.1 top2.JPG (file) |  |
163 KB | 1 | |
| 11:40, 10 October 2013 | Ringflash 1.1 bottom view.png (file) |  |
276 KB | 1 | |
| 11:39, 10 October 2013 | Ringflash 1.1 sideview.png (file) |  |
53 KB | 1 | |
| 11:31, 10 October 2013 | RingflashBoard.png (file) |  |
49 KB | 2 | |
| 11:31, 10 October 2013 | RingflashSchematic.png (file) |  |
44 KB | 3 | |
| 11:28, 9 October 2013 | Packets.pdf (file) |  |
29 KB | 1 | |
| 09:44, 9 October 2013 | Switch AC with arduino.PNG (file) |  |
34 KB | 1 | |
| 09:39, 9 October 2013 | Decimate village.PNG (file) |  |
38 KB | 1 | |
| 09:39, 9 October 2013 | DRO level shifter.PNG (file) |  |
46 KB | 1 | |
| 12:24, 8 October 2013 | Simulation.png (file) |  |
33 KB | 1 | |
| 09:08, 22 August 2013 | Done.jpg (file) |  |
121 KB | The finished high chair food tray | 1 |
| 09:07, 22 August 2013 | Old.jpg (file) |  |
120 KB | The original pin and bracket | 1 |
| 09:07, 22 August 2013 | New.jpg (file) |  |
122 KB | The new pin and repaired bracket | 1 |
| 09:04, 22 August 2013 | 3D printed endcap.jpg (file) |  |
188 KB | Endcap for the bracket | 1 |
| 09:01, 22 August 2013 | Before shallac2.jpg (file) |  |
63 KB | After stain but before shellac. Its too red here, but the shellac gave it a nice yellow which I apparently didn't get a picture of. | 1 |
| 08:56, 22 August 2013 | Before stain2.jpg (file) |  |
78 KB | The new pin, spring, and knob before staining or threaded insert. | 1 |
| 08:51, 22 August 2013 | Highchair done.jpg (file) | Error creating thumbnail: File missing |
121 KB | Finished! | 1 |
| 08:35, 22 August 2013 | New threaded.jpg (file) |  |
69 KB | The newly threaded and chased pin | 1 |
| 08:33, 22 August 2013 | Threading.jpg (file) |  |
93 KB | The threading operation of the new pin | 1 |
| 08:31, 22 August 2013 | Old and new prethread.jpg (file) |  |
81 KB | This is the old pin and the lathed new pin prior to threading which had to be done on another lathe. | 1 |
| 13:55, 19 June 2013 | 2Lens Microscope.png (file) |  |
16 KB | microscope diagram for the 2 lens disposable camera microscope | 2 |
| 07:39, 25 April 2013 | KF25 dustcover.png (file) |  |
10 KB | 3D model of a KF-25 dust cover | 1 |
| 20:33, 6 March 2013 | Microscope stops 0kerf15mm.pdf (file) | |
278 KB | 1 | |
| 20:32, 6 March 2013 | Microscope stops 0kerf15mm.png (file) |  |
194 KB | 1 | |
| 19:42, 6 March 2013 | Microscope stops.png (file) |  |
17 KB | 1 | |
| 12:18, 29 January 2013 | Chrony-photo-gate.png (file) |  |
46 KB | Schematic of the Photogate from the "Shooting Chrony" | 1 |
